Canon 3305211 User Manual - Page 69

B: Setting the White BalanceN If the exposure obtained in step 1 is way off, a correct white balance might not be obtained. If the image was captured while the Picture Style was set to [Monochrome] (p.62), it cannot be selected in step 3. Instead of a white object, an 18% gray card (commercially available) can produce a more accurate white balance. The personal white balance registered with the provided software will be registered under . If you do step 3, the data for the registered personal white balance will be erased. P Setting the Color Temperature You can numerically set the white balance's color temperature. 1 Select [White balance]. Under the [2] tab, select [White balance], then press . 2 Set the color temperature. Turn the dial to select [P]. Turn the dial to set the color temperature, then press . The color temperature can be set from 2500K to 10000K in 100K increments. When setting the color temperature for an artificial light source, set white balance correction (magenta or green) as necessary. If you want to set to the reading taken with a commerciallyavailable color temperature meter, take test shots and adjust the setting to compensate for the difference between the color temperature meter's reading and the camera's color temperature reading. 69