Canon Color imageCLASS MF8350Cdn Color imageCLASS MF8350Cdn/MF8050Cn Basic Ope - Page 92

4 After responding to the recoded message of the information service, press [ ] (Tone). You can switch to the tone signal. 1 2 3 4 Place documents on the platen glass or load them in the feeder. "Placing Documents" (→P.2-4) "Documents Requirements" (→P.2-2) Specify destination. 2010 01/01 12:52AM 012XXXXXXT Start Receiving Resolution: 200 x 1... Press [ ]. Set scanning settings for documents as needed. "Fax Settings" (→P.6-3) 5 Use the numeric keys to enter the required numbers for the information service. Specify destination. 2010 01/01 12:52AM 012XXXXXXT3456 Start Receiving Resolution: 200 x 1... Use the numeric keys to enter the international access code. For details on international access codes, contact the telephone company you are subscribed with. Fax 012 6 If you want to send faxes, press [ ] (B & W). NOTE Telephone call The external telephone must be connected to this machine. 5 Press [ ] (Pause) to enter a pause as needed. Check the dial tone before entering a fax number. If you enter the number before checking the dial tone, the call may not be connected or the wrong number may be dialed. • The letter indicating a pause is displayed. • A pause in the number represents a 2-second pause. To change the pause time, see "Pause Time" (→P.6-23). ] (Pause) • When you are adding pauses consecutively, press [ again. Using the Fax Functions Fax 012P Sending a Fax Abroad (Adding Pauses) When sending a fax abroad, you may need to insert a pause within the number. When communicating abroad, the signal distance is extreme and the signal route complicated. Because of this, you may not be able to connect to a recipient by dialing an international telephone identification number, country code, and the recipient's fax number at the same time. In this case, add a pause after the international telephone identification number. Because adding a pause provides a point where wait time can be added when dialing, it is easier to connect to the recipient. Keys to be used for this operation 6 Enter the country code, the area code, and the fax/telephone number using the numeric keys. Fax 012p031XXXXXX Pause FAX Numeric keys Start 6-8