Canon EOS 10D EOS 10D INSTRUCTIONS - Page 101
Flash Exposure Compensation
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Using the Built-in Flash Flash Exposure Compensation Flash exposure compensation can be set in the same way as with exposure compensation. It can be set up to +/-2 stops in 1/2-stop increments. Flash exposure compensation works in Creative Zone modes. 1 Press the < > button. ( ) Shooting with a Flash Decreased exposure Increased exposure 2 Set the flash exposure compensation amount. • Turn the < > switch to < >, then turn the < > dial to set the desired flash exposure compensation amount at the viewfinder or LCD panel. • " " indicates increased flash exposure, and " " indicates decreased flash exposure. Standard flash exposure index 7 Flash exposure level mark Decreased flash exposure Increased flash exposure • To cancel the flash exposure compensation, set the flash exposure compensation amount to < >. 3 Shoot. • The flash exposure compensation amount will remain in effect even after you turn the < > switch to < >. • In step 2, turning the < > dial sets the metering mode. (→p.74) • With C.Fn-06-1, you can set the camera to adjust exposure compensation in 1/3-stop increments. (→p.147) • With C.Fn-14-1, you can also disable the Auto reduction of fill flash function. (→p.150) 101