Canon EOS 10D EOS 10D INSTRUCTIONS - Page 124
Connecting to a Canon BJ Printer
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Connect the Camera to the Printer Connecting to a Canon BJ Printer To connect the camera and printer with the necessary cable, refer to the manuals that came with the printer. To BJ printer 1 Follow steps 1 to 3 in "Connecting to a Card Photo Printer" to connect the camera to the BJ printer. (→p.123) BJ printer-connected icon 2 Turn the camera's < > switch to < >, then press the < > button. s An image in the CF card will be displayed. 3 •Turn on the printer. Press the printer's power button to turn it on. s The < > icon will appear on the camera's LCD monitor. s The < > icon will appear on the printer's operation panel. • When disconnecting the cable from the camera's < > terminal, be sure to grasp the plug instead of the cord to pull it out. • Do not use any cable other than the dedicated interface cable to connect the camera and printer. • To disconnect the cable from the camera and printer, follow the procedure below: 1. Turn off the camera. 2. Disconnect the cable from the printer. 3. Disconnect the cable from the camera. • When you disconnect the camera from the printer, the < > icon or < > icon will disappear from the camera's LCD monitor and the camera will return to normal playback. • Even while the camera is connected to the printer, you can instantly switch to shooting by pressing the shutter button halfway (except during actual printing). 124