Canon EOS 10D EOS 10D INSTRUCTIONS - Page 129
Trimming
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Printing Options If you select [Multiple], [Borders] will be set to [Borderless] and [Date] will be [Off]. • If you select [Multiple], part of the image will be cut off vertically and horizontally when printed. • If you select [Bordered], almost all of the image area (as displayed on the LCD monitor) will be printed. The printing area frame will not be displayed. Trimming You can trim the image for printing. To trim an image, first see "Setting the Printing Style" (→p.127). 1 On the printing style screen, select [Trimming]. • Turn the < > dial to select [Trimming], then press < >. s The [Trimming] screen will appear. < > Reduce magnification < > Increase magnification 2 •Trim the image. The operation icons in the image area will disappear while you trim the image. They will reappear Trimming frame after 5 sec. of non-operation. • Changing the trimming frame size • Press the < > or < > button to change the size of the trimming frame. • The trimming frame's horizontal dimension can be 9 adjusted to one of eight sizes, and the vertical dimension can be adjusted to one of five sizes. • The trimming frame's minimum size is about half the screen size and the maximum size is almost < > Direction switch the same as the screen size. < > Moving direction • If a card photo printer is used and the trimming degrades the image quality, the trimming frame color will change from green to red. Direct Printing from the Camera 129