Canon EOS 10D EOS 10D INSTRUCTIONS - Page 24
Installing and Removing the Battery
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing and Removing the Battery Installing the Battery Load a fully charged BP-511 battery pack into the camera. 1 •Open the battery compartment cover. Slide the lever in the direction shown by the arrow in the diagram, and open the cover. 2 •Insert the battery into the camera. Make sure the battery pack is facing the right way, and insert it into the battery compartment. • Insert the battery pack until it locks into place. 3 •Close the cover. Press the cover closed until it clicks shut. Battery Pack BP-512 can also be used. Battery Level Icons The level of charge remaining is shown in three stages when the < > switch is set to < >. (→p.30) : Charge is sufficient. : Charge is low. : Battery pack must be recharged. 24
24
Installing and Removing the Battery
Installing the Battery
Load a fully charged BP-511 battery pack into the camera.
Open the battery compartment cover.
•
Slide the lever in the direction shown by the arrow
in the diagram, and open the cover.
1
Insert the battery into the camera.
•
Make sure the battery pack is facing the right way,
and insert it into the battery compartment.
•
Insert the battery pack until it locks into place.
2
Close the cover.
•
Press the cover closed until it clicks shut.
3
Battery Pack BP-512 can also be used.
Battery Level Icons
The level of charge remaining is shown in three stages when the <
> switch is set to <
>.
(
→
p.30)
: Charge is sufficient.
: Charge is low.
: Battery pack must be recharged.