Canon EOS 10D EOS 10D INSTRUCTIONS - Page 169
Printer in use - memory card type
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
On-screen Messages Message Cannot print! Description The image was captured by another camera or in an incompatible format. Or the image has been edited with a personal computer. Could not print ** images The image was captured by another camera or it has been edited with a personal computer and printing was attempted in accordance with the DPOF setting for ** prints. ** images remaining Since the printing with the DPOF setting was interrupted, ** prints still remain to be printed. Cannot trim The image was captured by another camera or it is in an incompatible format. Or the image has been edited with a personal computer. Such images cannot be trimmed. Battery level is too Direct printing was not possible, because the camera battery level is low. too low. When a BJ printer capable of direct printing is connected to the camera, the camera's LCD monitor may display any of the messages below. If any of these messages are displayed, check the error code on the BJ printer's operation panel and refer to the BJ printer's manual for the error description. Message Description No paper The paper has not been inserted properly or there is no paper. Or there is a problem with the paper feed operation. No ink There is no ink tank or the ink tank has no ink. Paper jam The paper jammed during printing. Printer in use Printing from the personal computer or the memory card in the printer is in progress. When the printing ends, the images in the camera's CF card will start printing automatically. Printer warming up The printer is preparing for printing. When the printer is ready, printing will start automatically. No printhead There is no print head. Printer cover open Close the printer's front cover. Media type error Paper that the printer cannot use has been selected. Select a paper that can be used with the [Style] setting on the camera's direct printing screen. Paper lever error Set the paper spacing lever to the proper position. Low ink level The ink tank must be replaced soon. Keep a new ink tank on hand. To resume printing, select [Resume] on the error message screen. 13 Reference 169