Canon EOS 10D EOS 10D INSTRUCTIONS - Page 27
Mounting and Detaching a Lens
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BeforeYou Start Mounting and Detaching a Lens Mounting a Lens 1 •Remove the caps. Remove the rear lens cap and the body cap by 1 turning them as shown by the arrow. Lens mount index 2 •Attach the lens. Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. 3 On the lens, set the focus mode switch to . • If the focus mode switch is set to < MF> (or on older lenses), autofocus will not operate. 4 Remove the front lens cap. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. • Turn the lens until the red dot is at the top, then detach the lens. • Since the EOS 10D's image coverage is smaller than the normal 35mm film format, the EF lens attached to the camera will have a telephoto effect equivalent to 1.6 times of the marked focal length. AF stands for autofocus. • MF or M stands for manual focus. •• Be careful not to lose the lens caps or body cap. EOS 10D image field (22.7 x 15.1 mm / 0.89 x 0.59 in) 35 mm image field (36 x 24 mm / 1.42 x 0.94 in) 27