Canon EOS 10D EOS 10D INSTRUCTIONS - Page 78
Using the Eyepiece Cover - shutter count
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Self-timer Operation / Using the Eyepiece Cover 3 •Shoot. Press the shutter button fully. s The self-timer lamp will start blinking and the beeper will sound to indicate that the self-timer is operating. s After about 10 sec., the image will be captured. During the first 8 sec., the lamp blinks and the beeper beeps slowly. During the final 2 sec., the lamp stays lit and the beeper beeps faster. s During the self-timer operation, the LCD panel counts down the seconds until the image is captured. • To cancel the self-timer after it starts, press the < > button. Do not stand in front of the camera when you press the shutter button to start the selftimer. Doing so prevents the camera from focusing on the subject. • You can set the beep that indicates the subject is in focus and the beep that indicates the self-timer is operating to [On] or [Off]. (→p.140) • When using the self-timer to shoot only yourself, lock the focus (→p.65) on an object at about the same distance as where you will be. Using the Eyepiece Cover During self-timer or remote control operation when your eye does not cover the viewfinder eyepiece, stray light may enter the eyepiece and affect the exposure when the image is captured. To prevent this, use the eyepiece cover (attached to the neck strap) to cover the eyepiece. 1 •Remove the eyecup. Grasp both sides of the eyecup and slide it up to remove. 2 •Attach the eyepiece cover. Slide the eyepiece cover down into the eyepiece groove to attach it. 78