Canon EOS 10D EOS 10D INSTRUCTIONS - Page 168

On-screen Messages Message Description Set Date/Time The date/time has not been set. Captured images will not have the correct image capture date/time. Turn off the camera After cleaning the image sensor, turn the < > switch to < >. after sensor cleaning Battery level is too low. Cannot clean sensor Folder number full If there is insufficient battery power, the shutter may close during the cleaning of the image sensor and the shutter curtains and image sensor might be damaged. To prevent this, either use a fully-charged battery or a household power outlet before starting to clean the image sensor. Keep a new CF card on hand. Since the 999Canon folder has been created, the current CF card will soon become full. (When "IMG_9999" is created, " " will be displayed.) When the card photo printer for direct printing is connected to the camera, the camera's LCD monitor may display any of the messages below. Message Description No paper The paper cassette has not been inserted properly or there is no paper in the cassette. Or there is a problem with the paper feed operation. No ink There is no ink cassette or the ink cassette has no ink. Incompatible paper The wrong-size paper has been loaded in the printer. Printing is not size possible with paper of this size. Incompatible ink size The wrong ink cassette has been loaded in the printer. Ink cassette error Printing is not possible with this ink cassette. Paper and ink do not The paper and ink do not match each other. match Paper jam The paper jammed during printing. Paper has been changed The paper size was changed prior to printing. Recharge the printer The printer's battery is exhausted. battery Communication error Communication error occurred. Readjust trimming Printing was attempted with a style different from the trimming setting. 168