Canon EOS 10D EOS 10D INSTRUCTIONS - Page 22
Recharging the Battery
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Recharging the Battery Connect the power cord. Connect the power cord to the charger. 1 •• Connect the power plug to an AC outlet. Remove the cover. Store the cover in a place where it will not be lost. 2 •• If you remove the battery from the camera, be sure to reattach the cover to protect against short circuit. mark 3 •Attach the battery. Align the battery's top edge with the mark on the charger. While pressing down the battery, slide it in the direction of the arrow. • To detach the battery, follow the above procedure in reverse. 4 Recharge the battery. s When the battery is attached to the charger, recharging starts automatically and the red lamp starts blinking. s A completely exhausted battery takes about 90 minutes to almost fully recharge. • The blinking frequency of the red lamp indicates the progress of the recharging. Battery charge Red lamp 0-50% Blinks once per second 50-75% Blinks twice per second Over 75% Blinks three times per second s After the battery recharging is almost completed, the red lamp will stop blinking and remain lit. Recharging the battery for another hour will fully recharge the battery. • After recharging the battery, detach it and unplug the power cord from the power outlet. Almost full Stays on 22