Canon EOS 10D EOS 10D INSTRUCTIONS - Page 57
Select the parameter., Set the parameter., Return to the [Parameters] menu., Select the Set No.
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Settings for Shooting Setting Processing Parameters 4 •Select the parameter. Turn the < > dial to select the parameter, then press < >. • The parameter selection will change in the following loop: [Contrast] [Sharpness] [Color tone] [Saturation] 5 •Set the parameter. Turn the < > dial to set the parameter, then press 3 < >. • Each parameter can be set to one of five settings. 6 •Return to the [Parameters] menu. Press the < > button twice to return to step 1. Then press < >. 7 •Select the Set No. that was set. Turn the < > dial to select [Set 1], [Set 2], or [Set 3], then press < >. s After the setting is completed, the menu will reappear. • To exit the menu and turn off the LCD monitor, press the < > button. With the parameters already set, when you set the < > switch to < >, the camera will start up and display " " on the LCD panel until it is ready for shooting. Then the parameter settings will be displayed. If [Set 1], [Set 2], or [Set 3] has been set, " ", " ", or " " will be displayed. And if [Adobe RGB] (→p.58) has been set, " " will be displayed. With C.Fn-01-2, you can set [Parameters] by pressing < > and turning the < > dial while looking at the LCD panel. (→p.146) 57