Canon EOS 10D EOS 10D INSTRUCTIONS - Page 38

Fully Automatic Shooting You can easily and confidently capture any subject, with no need to do anything but press the shutter button. The Canon EOS 10D can capture subjects at any of seven AF points, so that anybody can take great shots easily. 1 •Turn the Mode dial to < >. The < > AF mode, < > (single) drive mode, < > metering mode, " " ISO speed, and < > white balance will be set automatically. • One of six image-recording quality settings (except ) can be selected. (→p.46) AF point Maximum burst Focus confirmation light 2 •Focus the subject. Look through the viewfinder and aim any AF point over the subject. Then press the shutter button halfway. s The AF point that achieves focus will flash briefly. At the same time, the beeper will sound and the focus confirmation light in the viewfinder will light. s The exposure settings will be displayed in the viewfinder and on the LCD panel. • The number " " - " " displayed on the left of the focus confirmation light indicates maximum burst for continuous shooting. • If the CF card is almost full and has room for nine or fewer shots, the remaining number of shots that can fit on the card will be displayed by " " to " ". Shutter speed Aperture 3 •Shoot. Compose the shot and check that the exposure settings are not blinking. Then press the shutter button fully to shoot. s The captured image will be displayed for 2 sec. on the LCD monitor. 38