Canon EOS 10D EOS 10D INSTRUCTIONS - Page 91

Canceling AEB Auto Exposure Bracketing • Follow steps 1 and 2 to set the AEB amount to < >. • AEB will also be canceled automatically if you turn the < > switch to < >, change lenses, have flash-ready, replace the battery, or replace the CF card. Advanced Operations Neither flash nor bulb exposures can be used in AEB mode. •• If you set mirror lockup with C.Fn-12-1 (→p.149) and then use AEB, single-frame 6 shooting takes effect even if the drive mode is set to continuous shooting. If the drive mode is single frame, press the shutter button for each bracketed shot. •• AEB can also be set in combination with exposure compensation. If you set the exposure compensation amount beyond the displayable range, the indicator will look as shown below. However, the exposure compensation amount will still remain valid. For Exposure compensation by -2 stops and +/-1 stop AEB For < >: -2 stops and +/-1 stop AEB • C.Fn-06-1, enables the exposure compensation amount to be set in 1/3-stop increments. (→p.147) In this case, the AEB amount will be displayed as shown below. +/- 1/3 stop AEB +/- 2/3 stop AEB : -1/3 stop : -2/3 stop • C.Fn-09-2/3, changes the bracketing sequence to decreased exposure, standard exposure, and increased exposure. (→p.148) • C.Fn-09-1/3, can prevent AEB from being canceled after you turn the < > switch to < >, change lenses, have flash-ready, replace the battery, or replace the CF card. (→p.148) 91