Canon EOS 10D EOS 10D INSTRUCTIONS - Page 29
Removing the CF Card - price
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
BeforeYou Start Installing and Removing the CF Card Removing the CF Card Open the cover. Set the < > switch to < >. 1 •• Check that the " " message is not shown on the 1 LCD panel. • Make sure the access lamp is off (→p.15), and open the cover. 2 •Remove the CF card. Press the Eject button. s The CF card is ejected. • Close the cover. • While the access lamp is blinking (" the LCD panel), do not: " is displayed in the viewfinder and on • Shake or hit the camera. • Open the CF card slot cover. • Remove the battery. This is to prevent damage to the image data, CF card, or camera. • The menu cannot be used during image processing after image capture and while the image is being recorded onto the CF card (access lamp blinks). If you press the < > or < > button during this time, " " will be displayed on the LCD monitor. • If a CF card is used for the first time or " " is displayed on the LCD panel, see "Formatting a CF Card" on page 119 to format the card. • Do not use a low-capacity CF card. If the image file size is large, the CF card may not be able to save the image. • A microdrive is a recording medium using a hard disk. It has a large capacity and the price per megabyte is low. However, compared to a CF card equipped with a flash memory, it is vulnerable to vibration and physical shock. If you use a microdrive, be careful not to subject the camera to vibration, shake, or physical shock while it is recording or displaying images. 29