Canon EOS 10D EOS 10D INSTRUCTIONS - Page 77
Self-timer Operation
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Drive Mode Selection / Self-timer Operation • If the CF card has little room left and cannot fit more than eight images, continuous shooting might not be possible. • During continuous shooting, the captured images are first stored in the camera's internal memory and then successively transferred to the CF card. When the internal memory becomes full during continuous shooting, " " will be displayed on the LCD panel and in the viewfinder and the camera cannot take any more shots. As the captured images are transferred to the CF card, you will be able to capture more images. Press the shutter button halfway to check in the viewfinder the current remaining number of maximum burst ( to ) for continuous shooting. The maximum burst number will not be displayed when there is no CF card in the camera. • If you press the shutter button halfway before all the images in the internal memory are transferred to the CF card (while the access lamp blinks), the image transfer to the CF card will stop temporarily. • If " " is displayed in the viewfinder and on the LCD panel, wait until the access lamp turns off, then replace the CF card. The maximum burst during white balance bracketing is also 9 shots. •• In step 2, turning the < > dial will set the ISO speed. (→p.49) 5 Self-timer Operation The self-timer is convenient for group shooting. You can use it in any Basic mode or Creative mode. We recommend using a tripod when you use the self-timer. 1 •Select the self-timer. Press the < > button, then look at the LCD panel and turn the < > dial to select < >. Selecting the Metering Mode and Drive Mode 2 •Focus the subject. Look through the viewfinder and press the shutter button halfway. Check that the focus confirmation light < ●> and exposure settings are displayed. 77