Canon EOS 10D EOS 10D INSTRUCTIONS - Page 170
Readjust trimming
UPC - 750845811339
View all Canon EOS 10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
On-screen Messages Message Description Waste tank full To resume printing, press the BJ printer's Reset button. Have the waste ink tank replaced by your dealer or service center (see the list that came with the BJ printer) at your earliest convenience. Printer error Turn off the printer and turn it back on. If the error is still displayed, consult your nearest BJ printer service center (see the service center list in the printer's manual). Communication error An error occurred during communications. Turn off the printer and turn it back on and start printing again. Readjust trimming The style does not match the trimming that was set. Cannot print! The image was captured by another camera or in an incompatible format. Or the image has been edited with a personal computer. Could not print ** images The image was captured by another camera or it has been edited with a personal computer and printing was attempted according to the DPOF setting for ** prints. ** images remaining Since the printing with the DPOF setting was interrupted, ** prints still remain to be printed. Cannot trim The image was captured by another camera or in an incompatible format. Or the image has been edited with a personal computer. Such images cannot be trimmed. Battery level is too Direct printing was not possible, because the camera battery level is low. too low. 170