Canon MX310 MX310 series Quick Start Guide - Page 80
Cleaning the Protrusions Inside the Machine, Caution
UPC - 013803081282
View all Canon MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
4 Load this and only this sheet of paper in the (A) Rear Tray with the open side to the front. Set the Paper Thickness Lever to the left. For details on the Paper Thickness Lever, refer to "Inside" in "Main Components" of the User's Guide on-screen manual. 5 Perform bottom plate cleaning. (1) Press the Menu button repeatedly until MAINTENANCE appears. (2) Press the [ or ] button to select BOTTOM CLEANING, then press the OK button. The paper cleans the inside of the machine as it feeds through the machine. (A) Load the paper after unfolding it. Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning again. If the problem is not resolved after performing Bottom Plate Cleaning twice, the protrusions inside the machine may be stained. Clean them according to instructions. See "Cleaning the Protrusions Inside the Machine" on page 76. Note When performing Bottom Plate Cleaning again, make sure to use a new piece of paper. Cleaning the Protrusions Inside the Machine If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like. Caution Be sure to turn off the power and disconnect the power cord before cleaning the machine. 76 Routine Maintenance