Canon MX310 MX310 series Quick Start Guide - Page 89
Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight, Lines Are Misaligned, White - ink cartridge installation
UPC - 013803081282
View all Canon MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight Lines Are Misaligned Cause Action FINE Cartridge is not installed properly. Remove the FINE Cartridge, then reinstall it. / There is no ink left. Small dusts may be stuck between the contact points. In this case, the print result may be improved by reinstalling the FINE Cartridge. Also, check that the protective tape (A) is removed. (A) Print Head nozzles are clogged. The media is loaded with the wrong side facing upwards. Print Head is misaligned. White Streaks Cause Print Head nozzles are clogged. See "When Printing Becomes Faint or Colors Are Incorrect" on page 59 and perform any necessary maintenance operation. Many types of paper are made to be printed on only a particular side of the paper. Printing on the wrong side may cause unclear prints or prints with reduced quality. For detailed information on the printable side, refer to the instruction manuals supplied with the paper. If you did not align the Print Head after installation, straight lines may be printed misaligned. Make sure to align the Print Head after you install it. See "Aligning the Print Head" on page 64 to perform Print Head Alignment using the Operation Panel. Action See "When Printing Becomes Faint or Colors Are Incorrect" on page 59 and perform any necessary maintenance operation. Troubleshooting 85