Canon PIXMA MP520 MP520 series Quick Start Guide - Page 88
Error No.: 1700/1710 Is Displayed, Printer, Print & Fax Preferences, Edit Printer List - driver mac
View all Canon PIXMA MP520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Cause Action Machine is not connected properly. Make sure that the USB cable is plugged in securely to the machine and the computer. z If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult the reseller of the relay device for details. z There could also be a problem with the USB cable. Replace the USB cable and try printing again. Your machine is not selected in Printer on the Print dialog box. Select your machine's name in Printer on the Print dialog box. If your machine's name does not appear in Printer, follow the procedure below to check that the driver for your machine is installed to your computer. (1)Select Print & Fax Preferences from Printer. In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer. (2)Check that your machine's name is displayed in the list of printers and that the check box is selected. In Mac OS X v.10.2.8, check that your machine's name is displayed in Printer List. (3)If your machine's name is not displayed, click Add(+) to add the machine. If you cannot add the machine, follow the procedure described in your setup sheet to reinstall the MP Drivers. Error No.: 1700/1710 Is Displayed Cause The ink absorber is almost full. Action See "The ink absorber is almost full. Press OK to continue printing. Contact the service center." in "An Error Message Is Displayed on the LCD" on page 68. Error No.: 2001 Is Displayed Cause No response from connected digital camera or video camcorder. / Connected digital camera or video camcorder is not compatible with this machine. Action See "The device may be incompatible. Remove the device and check the manual supplied with the connected device." in "An Error Message Is Displayed on the LCD" on page 68. Error No.: 2002 Is Displayed Cause Action An unsupported USB hub is connected. See "An unsupported USB hub is connected. Remove the hub." in "An Error Message Is Displayed on the LCD" on page 68. 84 Troubleshooting