Cisco 7206VXR Configuration Guide - Page 112

Installing the Cable-Management Brackets Chapter 3 Installing a Cisco 7200 VXR Router Note If you have an NPE-G1 or NPE-G2, see the "Installing the NPE-G1 and NPE-G2 Cable-Management Brackets on a Front-Mounted Router" section on page 3-9 or the "Installing the Brackets on the Rear of the Chassis" section on page 3-11. This completes the steps for installing the cable-management brackets on a Cisco 7200 VXR router. Securing the Port Adapter Cables To secure port adapter interface cables to the cable-management brackets, complete the following steps: Note The eight removable tie wraps installed on the cable-management brackets secure port adapter interface cables to the brackets. We recommend that you use the tie wraps that shipped with the cable-management brackets. You can use standard tie wraps; however, you will have to cut and replace them with new tie wraps when you want to release or secure an interface cable to a bracket. Step 1 Step 2 Select a tie wrap and release its locking mechanism. Carefully lace the interface cables from a port adapter installed in the chassis between the two ends of the unlocked tie wrap. Note Be sure to leave a small service loop in the interface cable before securing it to the cable-management bracket. Step 3 With the interface cables between the ends of the tie wrap and the interface cables service loop in place, tighten the cable tie down around the interface cables until they are secured against the cable-management bracket. (See Figure 3-13.) Figure 3-13 Securing Interface Cables to the Cable-Management Brackets 5 2 1 ENABLED 0 3 1 Cisco 7200 Series ENABLED PCMCIA EN TD TC RD RC LB CD TD TC RD RC LB CD TD TC RD RC LB CD TD TC RD RC LB CD 3 0 1 LINK 2 3 ENABLED ETHERNET 10BT FAST SERIAL EN RX 0 SLOT 1 EJECT SLOT 0 MII FE II MEN RJE4N5 RJL4IN5K R 1O POWK 1 Service loop TX RJ-45 RX CPU RESET 1 0 TX RX 0 2 MII 1 LINK TX RJ45 RX 3 2 TX TOKEN RING 6 FAST ETHERNET 4 ETHERNET-10BFL 2 FAST ETHERNET INPUT/OUTPUT CONTROLLER 0 1 RX 4 3 TX 3-16 Cisco 7200 VXR Installation and Configuration Guide 84546 OL-5013-09