Cisco 7206VXR Configuration Guide - Page 65

Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Note An MII LINK LED is not provided on this I/O controller because the LED is provided on external transceivers that are required for connecting to the MII receptacle on the I/O controller. See Chapter 3, "Installing a Cisco 7200 VXR Router," the "Connecting to the I/O Controller Ethernet and Fast Ethernet Ports" section on page 3-30 for Fast Ethernet MII connection requirements. Input/Output Controller C7200-I/O-FE-MII LEDs Figure 1-26 shows the LEDs on the I/O controller with the Fast Ethernet port equipped with a single MII receptacle (C7200-I/O-FE-MII), and Table 1-30 lists the LEDs specific to this I/O controller model. Also see Table 1-24 for LEDs common to all I/O controllers. Figure 1-26 C7200-I/O-FE-MII LEDs and CPU Reset Button H6523 ENABLED ENABLED SLOT 1 SLOT 0 FAST ETHERNET INPUT/OUTPUT CONTROLLER EFNEABFLEELINCKPU RESPEOTWER IO OK Table 1-30 C7200-I/O-FE-MII I/O Controller LEDs LED Color FE ENABLE Green FE LINK Green Function Indicates that the Fast Ethernet port is initialized and enabled for operation by the system. This LED comes on after the I/O controller has been enabled and remains on during normal operation of the router. Indicates that the Fast Ethernet port has established a valid link with the network. This LED remains off during normal operation of the router unless there is an incoming carrier signal. Port Adapters and Service Adapters The port adapters and service adapters installed in the Cisco 7200 VXR routers are of the same type as those installed on the second-generation Versatile Interface Processors (VIPs) in the Cisco 7500 series routers, in Cisco 7000 series routers with the Cisco 7000 series Route Switch Processor (RSP7000) and Cisco 7000 series Chassis Interface (RSP7000CI), in the Cisco AS5800 Universal Access Server, and in the Cisco uBR7246 universal broadband router. OL-5013-09 Cisco 7200 VXR Installation and Configuration Guide 1-47