Cisco 7206VXR Configuration Guide - Page 63
Input/Output Controller C7200-I/O-FE LEDs, Color, Function
UPC - 746320975061
View all Cisco 7206VXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 1 Cisco 7200 VXR Product Overview Field-Replaceable Units Table 1-28 LED 100 Mbps LINK C7200-I/O-2FE/E I/O Controller LEDs Color Green Green Function Indicates that the port is configured for 100-Mbps operation (speed 100), or if configured for autonegotiation (speed auto), the port has detected a valid link at 100 Mbps. Note If the port is configured for 10-Mbps operation, or if it is configured for autonegotiation and the port has detected a valid link at 10 Mbps, the LED remains off. Indicates that the Ethernet/Fast Ethernet RJ-45 receptacle has established a valid link with the network. This LED remains off during normal operation of the router unless there is an incoming carrier signal. Input/Output Controller C7200-I/O-FE LEDs Figure 1-25 shows the LEDs on the I/O controller with the Fast Ethernet port that is equipped with an MII receptacle and an RJ-45 receptacle (C7200-I/O-FE), and Table 1-29 lists the LEDs specific to this I/O controller model. Also see Table 1-24 for LEDs common to all I/O controllers. OL-5013-09 Cisco 7200 VXR Installation and Configuration Guide 1-45