Cisco 7971G-GE Administration Guide - Page 72
Option, Description, To Change, Select, Validate
UPC - 746320966588
View all Cisco 7971G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Network Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone For information about the keys you can use to edit options, see the "Editing Values" section on page 4-3. Table 4-2 Network Configuration Menu Options Option Description To Change IPv4 Configuration In the IPv4 Configuration menu, you can do the following: • Enable or disable the phone to use the IP address that is assigned by the DHCP server. 1. Unlock network configuration options. 2. Scroll to IPv4 Configuration and press the Select softkey. • Manually set the IP Address, Subnet Mask, Default Routers, DNS Server, and Alternate TFTP servers. For more information on the IPv4 address fields, refer to Table 4-3. IPv6 Configuration This menu setting is disabled in this release. MAC Address Unique Media Access Control (MAC) address of the Display only-Cannot configure. phone. Host Name Unique host name that the DHCP server assigned to Display only-Cannot configure. the phone. Domain Name Name of the Domain Name System (DNS) domain in 1. Unlock network configuration options. which the phone resides. 2. Set the DHCP Enabled option to No. 3. Scroll to the Domain Name option, press the Edit softkey, and then enter a new domain name. 4. Press the Validate softkey and then press the Save softkey. Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in which the phone is a member. If the phone has not received an auxiliary VLAN, this option indicates the Administrative VLAN. The phone obtains its Operational VLAN ID via Cisco Discovery Protocol (CDP) from the switch to which the phone is attached. To assign a VLAN ID manually, use the Admin VLAN ID option. If neither the auxiliary VLAN nor the Administrative VLAN are configured, this option is blank. Admin. VLAN ID Auxiliary VLAN in which the phone is a member. 1. Unlock network configuration options. Used only if the phone does not receive an auxiliary VLAN from the switch; otherwise it is ignored. 2. Scroll to the Admin. VLAN ID option, press the Edit softkey, and then enter a new Admin VLAN setting. 3. Press the Validate softkey and then press the Save softkey. Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 4-6 OL-15299-01