Cisco 7971G-GE Administration Guide - Page 87
User Preferences > Audio Preferences >, Audio Preferences > Wideband Handset.
UPC - 746320966588
View all Cisco 7971G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-13 Media Configuration Menu Options (continued) Option Recording Tone Duration Description To Change Indicates the length of time in milliseconds that the beep tone plays. If the value you configure here is less than one third the interval, then this value overrides the default provided by the Network Locale. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 to 3000 Note For some Network Locales that use a complex cadence, this setting applies only to the first beep tone. Wideband Headset Wideband Handset See also: Recording Tone Indicates whether wideband is enabled or disabled for the headset. Default: Disabled • If Wideband Headset UI Control is enabled, you or the user can use the phone and choose > User Preferences > Audio Preferences > Wideband Headset. • If Wideband Headset UI Control is disabled, from Cisco Unified Communications Manager Administration and choose Device > Phone > Phone Configuration to set this value. Note If you allowed this option to be user controllable (in the Wideband Headset UI Control option), the user-configured value takes precedence. Indicates whether wideband is enabled or disabled for the handset. Default: "Use Phone Default" on Cisco Unified Communications Manager Administration. (This default means that the phone will be enabled for a wideband handset only if the phone was shipped with a wideband handset.) • If Wideband Handset UI Control is enabled, you or the user can choose > User Preferences > Audio Preferences > Wideband Handset. • If Wideband Handset UI Control is disabled, use Cisco Unified Communications Manager Administration and choose Device > Phone > Phone Configuration to set this value. Note If you allowed this option to be user controllable (in the Wideband Handset UI Control option), the user-configured value takes precedence. OL-15299-01 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 4-21