Cisco 7971G-GE Administration Guide - Page 83
NTP Configuration Menu (SIP Phones Only), UI Configuration Menu
UPC - 746320966588
View all Cisco 7971G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-10 Locale Configuration Menu Options (continued) Option Description To Change Network Locale Version Version of the network locale loaded on the phone. Display only-Cannot configure. NTP Configuration (SIP phones only) Provides access to the NTP Configuration Menu. For more information, see the "NTP Configuration Menu (SIP Phones Only)" section on page 4-17 Display only-Cannot configure. NTP Configuration Menu (SIP Phones Only) The NTP Configuration menu displays information about the NTP server and mode configuration used by SIP phones. Table 4-11 describes the options on this menu. Table 4-11 NTP Configuration Menu Options Option NTP Server 1 NTP Server 2 NTP Mode 1 NTP Mode 2 Description IP address of the primary NTP server. IP address of the secondary or backup NTP server. Primary server mode. Supported modes are Directed Broadcast and Unicast. Secondary server mode. Supported modes are Directed Broadcast and Unicast. To Change Display only-Cannot configure. Display only-Cannot configure. Display only-Cannot configure. Display only-Cannot configure. UI Configuration Menu The UI Configuration menu displays the status of various user interface features on the phone. Table 4-12 describes the options on this menu. Table 4-12 UI Configuration Menu Options Option Auto Line Select BLF for Call Lists Description To Change Indicates whether the phone shifts the call focus to incoming calls on all lines. When this option is disabled, the phone only shifts the call focus to incoming calls on the line that is in use. When this option is enabled, the phone shifts the call focus to the line with the most recent incoming call. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Default: Disabled Indicates whether the Busy Lamp Field (BLF) is From Cisco Unified Communications Manager enabled for call lists. Administration, choose System > Enterprise Parameters. OL-15299-01 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 4-17