Cisco 7971G-GE Administration Guide - Page 86

Device > Phone &gt, Phone Configuration, From Cisco Unified Communications Manager

Page 86 highlights

Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-13 Media Configuration Menu Options (continued) Option Description To Change Recording Tone Indicates whether a recording tone (often referred to as a beep tone) is enabled or disabled for the phone. If the recording tone option is enabled, the phone plays the beep tone in both directions of every call, regardless of whether the call actually gets recorded. The beep tone first sounds when a call is answered. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. You may want to notify your users if you enable this option. Default: Disabled Related Parameters: • Recording Tone Local Volume • Recording Tone Remote Volume • Recording Tone Duration Other related parameters-Beep tone frequency in hz, the length of the beep tone (called duration), and how often the beep tone plays (called interval)-are defined on a per-Network Locale basis in the xml file that defines tones. This xml file is usually named tones.xml or g3-tones.xml. Recording Tone Local Volume Indicates the loudness setting for the beep tone From Cisco Unified Communications Manager that is received by the party whose phone has the Administration, choose Device > Phone > Recording Tone option enabled. Phone Configuration. This setting applies for each listening device (handset, speakerphone, headset). Range: 0 percent (no tone) to 100 percent (same level as current volume setting on the phone). Default: 100 See also: Recording Tone Recording Tone Remote Volume Indicates the loudness setting for the beep tone that the remote party receives. The remote party is the party who is on a call with the party whose phone has the Recording Tone option enabled. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 percent to 100 percent. (0 percent is -66 dBM and 100 percent is -3 dBM.) Default: 84 percent (-10dBM) See also: Recording Tone 4-20 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 OL-15299-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219

4-20
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Recording Tone
Indicates whether a recording tone (often
referred to as a
beep tone
) is enabled or disabled
for the phone. If the recording tone option is
enabled, the phone plays the beep tone in both
directions of every call, regardless of whether
the call actually gets recorded. The beep tone
first sounds when a call is answered.
You may want to notify your users if you enable
this option.
Default: Disabled
Related Parameters:
Recording Tone Local Volume
Recording Tone Remote Volume
Recording Tone Duration
Other related parameters—Beep tone frequency
in hz, the length of the beep tone (called
duration
), and how often the beep tone plays
(called
interval
)—are defined on a per-Network
Locale basis in the xml file that defines tones.
This xml file is usually named tones.xml or
g3-tones.xml.
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
Recording Tone Local
Volume
Indicates the loudness setting for the beep tone
that is received by the party whose phone has the
Recording Tone option enabled.
This setting applies for each listening device
(handset, speakerphone, headset).
Range: 0 percent (no tone) to 100 percent (same
level as current volume setting on the phone).
Default: 100
See also: Recording Tone
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
Recording Tone Remote
Volume
Indicates the loudness setting for the beep tone
that the
remote party
receives. The
remote party
is the party who is on a call with the party whose
phone has the Recording Tone option enabled.
Range: 0 percent to 100 percent. (0 percent is
–66 dBM and 100 percent is –3 dBM.)
Default: 84 percent (–10dBM)
See also: Recording Tone
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
Table 4-13
Media Configuration Menu Options (continued)
Option
Description
To Change