Cisco 7971G-GE Administration Guide - Page 94
Device >, Phone, Device > Phone > Phone, Configuration, Displaying a Configuration Menu
UPC - 746320966588
View all Cisco 7971G-GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-18 Network Configuration Menu Options (continued) Option CDP: SW Port Description To Change Indicates whether CDP is enabled on the switch port (default is enabled). • Enable CDP on the switch port for VLAN assignment for the phone, power negotiation, QoS management, and 802.1x security. From Cisco Unified Communications Manager Administration, choose Device > Phone. • Enable CDP on the switch port when the phone is connected to a Cisco switch. Note When CDP is disabled in Cisco Unified Communications Manager, a warning is presented, indicating that CDP should be disabled on the switch port only if the phone is connected to a non-Cisco switch. LLDP: PC Port LLDP-MED: SW Port LLDP Power Priority LLDP Asset ID The current PC and switch port CDP values are shown on the Settings menu. Enables and disables Link Layer Discovery Protocol (LLDP) on the PC port. Use this setting to force the phone to use a specific discovery protocol. Settings include: • Enabled-default • Disabled From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration Enables and disables Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED) on the switch port. Use this setting to force the phone to use a specific discovery protocol, which should match the protocol supported by the switch. Settings include: From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration • Enabled-default • Disabled Advertises the phone's power priority to the switch, enabling the switch to appropriately provide power to the phones. Settings include: • Unknown-default • Low From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration • High • Critical Identifies the asset ID assigned to the phone for inventory management. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration Related Topics • Displaying a Configuration Menu, page 4-2 • Network Configuration Menu, page 4-5 4-28 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0 OL-15299-01