Cisco 877W Hardware Installation Guide - Page 68
Verifying Router Operations - a e channel
UPC - 882658019579
View all Cisco 877W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Verifying Router Operations Chapter 4 Router Cabling Procedures Verifying Router Operations To verify that all devices are properly connected to the router, turn on all the connected devices; then use Table 4-1 to help you verify correct router operation by checking the LEDs. Table 4-1 Verifying the Router Operation Power and Link Power To servers, PCs, or workstations connected to the LAN ports (FE0, FE1, FE2, or FE3) LEDs to Check OK ETHERNET LAN 0, ETHERNET LAN 1, ETHERNET LAN 2, or ETHERNET LAN 3 WAN RXD WAN TXD To broadband modem, or to an external Ethernet switch WAN LNK WAN RXD WAN TXD To xDSL line (ADSL or ADSL CD, G.SHDSL CD G.SHDSL) To ISDN line To PPP clients To VPN tunnel To wireless LAN ADSL RXD, G.SHDSL RXD ADSL TXD, G.SHDSL TXD ISDN LNK ISDN B1 and ISDN B2 PPP VPN WLAN OK WLAN DATA Normal Patterns On when power is supplied to router. ETHERNET LAN 0, ETHERNET LAN 1, ETHERNET LAN 2, or ETHERNET LAN 3 is on when the LAN port is physically connected to a server, PC, or workstation. WAN RXD blinks when a port on the built-in Ethernet switch receives an Ethernet packet. WAN TXD blinks when a port on the built-in Ethernet switch sends an Ethernet packet. WAN LNK is on when the WAN port is physically connected to a broadband modem or to an external Ethernet switch. WAN RXD blinks when the WAN port receives an Ethernet packet. WAN TXD blinks when the WAN port sends an Ethernet packet. WAN xDSL carrier detect status: • On when the line is connected to the ADSL or G.SHDSL DSLAM. • Blinks when the router tries to connect to the ADSL or G.SHDSL DSLAM. ADSL RXD or G.SHDSL RXD blinks when the xDSL line receives a packet. ADSL RXD or G.SHDSL TXD blinks when the xDSL line sends a packet. ISDN line status-Green if the ISDN line is up. ISDN BRI channel status-Orange if the channel is up. PPP is on if either a PPPoE or PPPoA client is running. VPN is on if a crypto session is running. Wireless LAN link status: • Solid green if at least one client is associated. • Blinks if no client is associated. WLAN DATA is on if there is traffic on the wireless link. 4-24 Cisco 850 Series and Cisco 870 Series Access Routers Hardware Installation Guide OL-5331-01