Cisco SPA962-NA Administration Guide - Page 102

Info Tab Field Message Waiting Mapped SIP Port Chapter 5 SPA900 Series Phone Field Reference Description Indicates whether you have new voicemail waiting: Yes or No. This is updated when voicemail notification is received. You can also manually modify it to clear or set the flag. Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is stored in long term memory and survives after reboot or power cycle. Port number of the SIP port mapped by NAT. Line 1/2/3/4/5/6 Status Field Call 1/2 State Call 1/2 Tone Call 1/2 Encoder Call 1/2 Decoder Call 1/2 Type Call 1/2 Remote Hold Call 1/2 Callback Call 1/2 Peer Name Call 1/2 Peer Phone Call 1/2 Duration Call 1/2 Packets Sent Call 1/2 Packets Recv Call 1/2 Bytes Sent Call 1/2 Bytes Recv Call 1/2 Decode Latency Call 1/2 Jitter Call 1/2 Round Trip Delay Call 1/2 Packets Lost Call 1/2 Packet Error Call 1/2 Mapped RTP Port Call 1/2 Media Loopback Description Status of the call. Type of tone used by the call. Codec used for encoding. Codec used for decoding. Direction of the call. Indicates whether the far end has placed the call on hold. Indicates whether the call was triggered by a call back request. Name of the internal phone. Phone number of the internal phone. Duration of the call. Number of packets sent. Number of packets received. Number of bytes sent. Number of bytes received. Number of milliseconds for decoder latency. Number of milliseconds for receiver jitter. Number of milliseconds for delay. Number of packets lost. Number of invalid packets received. The port mapped for Real Time Protocol traffic for Call 1/2. The media loopback status of the phone. Linksys 900 Series IP Phone Administrator Guide 5-4 Document Version 3.0