Cisco SPA962-NA Administration Guide - Page 145
Dial Plan, Auto, InBand+INFO, or AVT+INFO. InBand sends DTMF using the audio path.
View all Cisco SPA962-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Chapter 5 SPA900 Series Phone Field Reference Ext 1/2/3/4/5/6 Tab DTMF Tx Method Release Unused Codec Select the method to transmit DTMF signals to the far end: InBand, AVT, INFO, Auto, InBand+INFO, or AVT+INFO. InBand sends DTMF using the audio path. AVT sends DTMF as AVT events. INFO uses the SIP INFO method. Auto uses InBand or AVT based on the outcome of codec negotiation. The default is Auto. This feature allows the release of codecs not used after codec negotiation on the first call, so that other codecs can be used for the second line. To use this feature, select yes. Otherwise, select no. The default is yes. Dial Plan The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.). The syntax for a dial plan expression is as follows: Table 5-1 Dial Plan Script Syntax Dial Plan Entry *xx [3469]11 0 00 [2-9]xxxxxx 1xxx[2-9]xxxxxx xxxxxxxxxxxx. Functionality Allow arbitrary 2 digit star code Allow x11 sequences Operator Int'l Operator US local number US 1 + 10-digit long distance number Everything else (Int'l long distance, FWD, ...) If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where '@', '.', and ':' are dialed by entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is enabled. Document Version 3.0 Linksys 900 Series IP Phone Administrator Guide 5-47