Cisco SPA962-NA Administration Guide - Page 55
These parameters can also be modified from the administration web server, on
View all Cisco SPA962-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 3 Managing Linksys 900 Series IP Phones Localization d5=;x5=; d6=;x6=; d7=;x7=; d8=;x8=; d9=;x9=; The following is an example value: serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml • Language Selection-This parameter is used to select the default language. Its value needs to match one of the languages supported by the dictionary server. The script (dx value) is as follows: The default is blank and the maximum number of characters is 512. The following is an example: Spanish These parameters can also be modified from the administration web server, on the Regional settings tab, as shown in Figure 3-3. Figure 3-3 Dictionary Server Configuration Parameters During startup, the phone checks the selected/preferred language and downloads the dictionary from the TFTP/HFTP provisioning server indicated in the device configuration. The dictionaries are available at the following website: http://www.linksys-itsp.com The dictionaries are found in the FW and Tools section, LVS area. Currently dictionaries are available for the following languages: • English • Spanish • German, • Dutch • Italian • French • Portuguese • Danish Document Version 3.0 Linksys 900 Series IP Phone Administrator Guide 3-7