Cisco SPA962-NA Administration Guide - Page 45
IVR Options, IVR Menu Choice, Parameters, Notes - review
View all Cisco SPA962-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2 Getting Started Using the Interactive Voice Response Interface Step 5 To enter a period, use the star key (*). When entering a value, such as an IP address, to exit without entering any changes, press the * (star) key twice within half a second. Otherwise, the * is treated as a decimal point. After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection. To save the new setting, press 1. To review the new setting, press 2. To re-enter the new setting, press 3. To cancel your entry and return to the main menu, press * (star). For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. If the menu is inactive for more than one minute, the 900 Series phone times out. You need to re-enter the menu by pressing ****. To exit the menu, hang up the telephone. The settings you have saved take effect after you hang up the telephone. The 900 Series phone may reboot at this time. IVR Options Table 2-2 summarizes the options provided by the IVR. Table 2-2 IVR Options IVR Action Enter IVR Menu IVR Menu Choice * * * * Exit IVR Menu Check DHCP 3948 100 Enable/Disable DHCP 101 Check WAN IP 110 Address Set Static IP Address 111 Parameter(s) Notes None Ignore SIT or other tones until you hear, "Linksys configuration menu. Enter option followed by the pound key or hang-up to exit." None None IVR announces whether DHCP is enabled or disabled. Enter 1 to enable Requires password Enter 0 to disable None IVR announces the current IP address of the WAN port. Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. DHCP must be "Disabled," otherwise you hear, "Invalid Option," if you try to set this value. Requires password Document Version 3.0 Linksys 900 Series IP Phone Administrator Guide 2-17