Cisco SPA962-NA Administration Guide - Page 142

Subscriber Information, Whether to use DNS SRV lookup for Proxy and Outbound Proxy.

Page 142 highlights

Ext 1/2/3/4/5/6 Tab Chapter 5 SPA900 Series Phone Field Reference Field Register Expires Ans Call Without Reg Use DNS SRV DNS SRV Auto Prefix Proxy Fallback Intvl Proxy Redundancy Method Description Allow answering inbound calls without successful (dynamic) registration by the unit. If proxy responded to REGISTER with a smaller Expires value, the PAP2T will renew registration based on this smaller value instead of the configured value. If registration failed with an Expires too brief error response, the PAP2T will retry with the value given in the Min-Expires header in the error response. The default is 3600. Expires value in sec in a REGISTER request. PAP2T will periodically renew registration shortly before the current registration expired. This parameter is ignored if is no. Range: 0 - (231 - 1) sec Whether to use DNS SRV lookup for Proxy and Outbound Proxy. The default is no. If enabled, the PAP2T will automatically prepend the Proxy or Outbound Proxy name with _sip._udp when performing a DNS SRV lookup on that name. The default is no. This parameter sets the delay (sec) after which the PAP2T will retry from the highest priority proxy (or outbound proxy) servers after it has failed over to a lower priority server. This parameter is useful only if the primary and backup proxy server list is provided to the PAP2T via DNS SRV record lookup on the server name. (Using multiple DNS A record per server name does not allow the notion of priority and so all hosts will be considered at the same priority and the PAP2T will not attempt to fall back after a fail over). The default is 3600 PAP2T will make an internal list of proxies returned in DNS SRV records. In normal mode, this list will contain proxies ranked by weight and priority. if Based on SRV port is configured the PAP2T does normal first, and also inspect the port number based on 1st proxy's port on the list. The default is Normal. Subscriber Information Field Display Name User ID Password Description Display name for caller ID. Extension number for this line. Password for this line. 5-44 Linksys 900 Series IP Phone Administrator Guide Document Version 3.0

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

5-44
Linksys 900 Series IP Phone Administrator Guide
Document Version 3.0
Chapter 5
SPA900 Series Phone Field Reference
Ext 1/2/3/4/5/6 Tab
Subscriber Information
Register Expires
Allow answering inbound calls without successful (dynamic) registration by the
unit. If proxy responded to REGISTER with a smaller Expires value, the PAP2T
will renew registration based on this smaller value instead of the configured
value. If registration failed with an Expires too brief error response, the PAP2T
will retry with the value given in the Min-Expires header in the error response.
The default is 3600.
Ans Call Without Reg
E
xpires value in sec in a REGISTER request. PAP2T will periodically renew
registration shortly before the current registration expired. This parameter is
ignored if <Register> is no. Range: 0 – (231 – 1) sec
Use DNS SRV
Whether to use DNS SRV lookup for Proxy and Outbound Proxy.
The default is no.
DNS SRV Auto Prefix
If enabled, the PAP2T will automatically prepend the Proxy or Outbound Proxy
name with _sip._udp when performing a DNS SRV lookup on that name.
The default is no.
Proxy Fallback Intvl
This parameter sets the delay (sec) after which the PAP2T will retry from the
highest priority proxy (or outbound proxy) servers after it has failed over to a
lower priority server. This parameter is useful only if the primary and backup
proxy server list is provided to the PAP2T via DNS SRV record lookup on the
server name. (Using multiple DNS A record per server name does not allow the
notion of priority and so all hosts will be considered at the same priority and the
PAP2T will not attempt to fall back after a fail over).
The default is 3600
Proxy Redundancy Method
PAP2T will make an internal list of proxies returned in DNS SRV records. In
normal mode, this list will contain proxies ranked by weight and priority.
if Based on SRV port is configured the PAP2T does normal first, and also inspect
the port number based on 1
st
proxy’s port on the list.
The default is Normal.
Field
Description
Display Name
Display name for caller ID.
User ID
Extension number for this line.
Password
Password for this line.
Field
Description