Home » Cisco Manuals » Telephony » Cisco SPA962-NA » Manual Viewer

Cisco SPA962-NA Administration Guide - Page 95

Ext 1/2/3/4, Line 1

Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Chapter 4 LCD Command Reference Guide 12 Reboot Ext 1/2/3/4 Shortcut: Menu, 11, 2 or 3 or 4 or 5 select To see the settings for an extension, from the Status menu, press 2 for Ext 1, 3 for Ext 2, 4 for Ext 3, and 5 for Ext 4. The LCD displays Registered if the extension is registered, the last registration date and time, and the time in seconds until the next registration. If the extension is not registered, the phone displays Not Registered. Line 1, 2,3,4 Shortcut: Menu, 11, 6 or 7 or 8 or 9 select To see the settings for a line, from the Status menu, press 6 for Ext 1, 7 for Ext 2, 8 for Ext 3, and 9 for Ext 4. The display shows the status of the line including if the line is ready and what tone is used. 12 Reboot Shortcut: Menu, 12, ok This option lets the user reboot the phone. To select Reboot, press the Menu button and press 12, or scroll down until the selection is highlighted and then press select soft key. The LCD displays Confirm System Reboot ?. The display shows two options Reboot or Cancel. Select Reboot to reboot the phone. The option is only displayed for 5 seconds. After 5 seconds, the display returns to the Menu option. 13 Restart Shortcut: Menu, 13, ok This option lets the user restart the phone. To select Restart, press the Menu button and press 13, or scroll down until the selection is highlighted and then press the select soft key. The menu displays Confirm System Restart? This display shows the options ok or cancel. Select ok to restart the phone. This option is only displayed for 5 seconds. After 5 seconds, the display is returned to the Menu option. 14 Factory Reset Shortcut: Menu, 14, ok This option lets the user reset the parameters to the factory settings. To select Factory Reset, press the Menu button and press 14, or scroll down until the selection is highlighted and press the select soft key. The menu displays All parameters are reset to factory default values, continue? The display shows two options: ok or cancel. Select ok to change the settings of the phone to the factory default settings. This option is only displayed for 5 seconds. After 5 seconds, the display is returned to the Menu option. Document Version 3.0 Linksys 900 Series IP Phone Administrator Guide 4-13

Section	Page
Linksys 900 Series IP Phone Administrator Guide	1
Contents	3
Preface	11
Document Audience	11
Linksys 900 Series IP Telephones	11
How This Document is Organized	12
Document Conventions	12
Related Documentation	13
Technical Support	13
1	15
Introducing Linksys 900 Series IP Phones	15
Overview	15
SPA900 Series Features	16
SPA901 Features	17
SPA92x, SPA94x, and SPA962 Features	18
Ensuring Voice Quality	18
Feature Descriptions	20
SIP Proxy Redundancy	20
Supported Codecs	20
Other Features	22
Technology Background	24
Session Initiation Protocol	24
Using 900 Series Phones with a Firewall or Router	24
Network Address Translation	25
NAT Overview	25
NAT Types	26
Simple Traversal of UDP Through NAT	26
SIP-NAT Interoperation	27
Where to Go From Here	28
2	29
Getting Started	29
Linksys 900 Series IP Phones	29
Caring for Your Hardware	30
SPA901	30
Front Panel and Side of Phone	31
Back Panel	31
SPA92x, SPA94x, and SPA962 Hardware Features	31
SPA921	32
Front Panel	32
Back Panel	33
SPA922	33
SPA941	33
Front Panel	34
Back Panel	34
SPA942	35
SPA962	35
Front Panel	36
Back Panel	36
Establishing Connectivity	37
Bandwidth Requirements	37
Installing the SPA900 Series IP Phone	38
Assembling the Phone and Connecting to the Network	38
Attaching the Desk Stand	38
Mounting the Phone to the Wall	39
Turning on the Phone	39
Using the Administration Web Server	39
Connecting to the Administration Web Server	40
Administrator Account Privileges	40
Web Interface URLs	41
Upgrade URL	41
Resync URL	42
Reboot URL	42
Provisioning	42
Provisioning Capabilities	43
Configuration Profile	43
Using the Interactive Voice Response Interface	44
Using the IVR Menu	44
IVR Options	45
Entering a Password through the IVR	47
3	49
Managing Linksys 900 Series IP Phones	49
Using the LCD Display	49
LCD Display Controls	50
Using Soft Keys	51
Entering and Saving Settings	53
Localization	54
Changing the Display Background (SPA962)	56
Call Appearances and Extensions	57
Line Key LEDs	58
Using Call Features	59
Selecting the Audio I/O Device and Line	60
Making Calls	60
Answering and Ending Calls	61
Hold and Resume	61
Call Waiting	61
Speed Dialing	62
Three-Way Conferencing	62
Attended Call Transfer	63
Blind Call Transfer	63
Call Back	64
Message Waiting Indication (MWI)	64
Accessing Voicemail	64
Muting Calls	64
Shared Call Appearances	65
Personal Directory	65
Caller and Called Name Matching	65
Dialing Assistance	66
Supplementary Services	66
Call Logs	66
Audio Volume Adjustment	68
Managing Ring Tones	68
Configuring a Dial Plan	70
Dial Plan Digit Sequences	70
Dial Plan Rules	71
Digit Sequence Syntax	71
Element Repetition	71
Sub-sequence Substitution	72
Intersequence Tones	72
Number Barring	72
Interdigit Timer Master Override	72
Local Timer Overrides	72
Pause	72
Implicit Sequences	73
Dial Plan Examples	73
Dial Plan Timers	74
Interdigit Long Timer	74
Interdigit Short Timer	74
Dial Plans	74
System Administration	75
Reboot and Restart	75
Factory Reset	75
Password Protection	75
Managing the Time/Date	75
Daylight Saving Time	76
Using Star Codes to Activate/Deactivate Services	77
Disabling Services	78
Error and Log Reporting	79
Troubleshooting FAQ	80
4	83
LCD Command Reference Guide	83
1 Directory	84
Entering Names and Numbers into the Directory	84
Entering Directory Names, Numbers and Ring Default	84
2 Speed Dial	85
3 Call History	85
Redial List	85
Answered Calls	86
Missed Calls	86
4 Ring Tone	86
5 Preferences	86
5.1 Block Caller ID	87
5.2 Block Anonymous Call	87
5.3 Do Not Disturb	87
5.4 Secure Call	87
5.5 Dial Assistance	88
5.6 Preferred Audio Device	88
6 Call Forward	88
6.1 CFWD All Number	88
6.2 CFWD Busy Number	88
6.3 CFWD No Ans Number	89
6.4 CFWD No Ans Delay	89
7 Time/Date	89
8 Voice Mail	89
9 Network	90
9.1 DCHP	90
9.2 Current IP Address	90
9.3 Host Name	91
9.4 Domain	91
9.5 Current NetMask	91
9.6 Current Gateway	91
9.7 Enable Web Server	91
9.8 Non DHCP IP Address	92
9.9 Non DHCP Subnet Mask	92
9.10 Non DHCP Default Route	92
9.11 Non DHCP DNS 1	92
9.12 Non DHCP DNS 2	92
9.13 Non DHCP NTP Server 1	92
9.14 Non DHCP NTP Server 2	93
10 Product Info	93
10.1 Product Name	93
10.2 Serial Number	93
10.3 Software Version	93
10.4 Hardware Version	94
10.5 MAC Address	94
10.6 Client Cert	94
11 Status	94
Phone	94
Ext 1/2/3/4	95
Line 1, 2,3,4	95
12 Reboot	95
13 Restart	95
14 Factory Reset	95
15 Set Password	96
16 Set LCD Contrast	96
17 CallPark Status	96
18 Language (SPA922, 942, and 962)	96
5	99
SPA900 Series Phone Field Reference	99
Info Tab	99
System Information	100
Product Information	100
Phone Status	101
Ext 1/2/3/4/5/6 Status	101
Line 1/2/3/4/5/6 Status	102
Downloaded Ring Tone	103
System Tab	104
System Configuration	104
Internet Connection Type	104
Static IP Settings	105
PPPoE Settings	105
Optional Network Configuration	105
VLAN Settings	106
SIP Tab	107
SIP Parameters	107
SIP Timer Values (sec)	109
Response Status Code Handling	110
RTP Parameters	111
SDP Payload Types	113
NAT Support Parameters	115
Linksys Key System Parameters	116
Regional Tab	117
Call Progress Tones	117
Distinctive Ring Patterns	119
Control Timer Values (sec)	120
Vertical Service Activation Codes	120
Outbound Call Codec Selection Codes	125
Miscellaneous	127
Phone Tab	131
General	131
Line Key 1/2/3/4/5/6	131
Miscellaneous Line Key Settings	132
Line Key LED Pattern	132
Supplementary Services	133
Ring Tone	134
Auto Input Gain (dB)	135
Background Picture (SPA 962)	135
Ext 1/2/3/4/5/6 Tab	136
General	136
Share Line Appearance	136
NAT Settings	137
Network Settings	137
SIP Settings	138
Call Feature Settings	140
Proxy and Registration	141
Subscriber Information	142
Audio Configuration	143
Dial Plan	145
User Tab	147
Call Forward	147
Speed Dial	148
Supplementary Services	148
Audio Volume	149
Phone GUI Menu Color Settings (SPA962)	149
A	151
Acronyms	151
B	155
Glossary	155

Match case Limit results 1 per page

4-13

Linksys 900 Series IP Phone Administrator Guide

Document Version 3.0

Chapter 4

LCD Command Reference Guide

12 Reboot

Ext 1/2/3/4

Shortcut: Menu, 11, 2 or 3 or 4 or 5 select

To see the settings for an extension, from the Status menu, press

for Ext 1,

for Ext 2,

for Ext 3, and

for Ext 4.

The LCD displays

Registered

if the extension is registered, the last registration date and time, and the

time in seconds until the next registration. If the extension is not registered, the phone displays

Not

Registered

Line 1, 2,3,4

Shortcut: Menu, 11, 6 or 7 or 8 or 9 select

To see the settings for a line, from the Status menu, press

for Ext 1,

for Ext 2,

for Ext 3, and

for

Ext 4. The display shows the status of the line including if the line is ready and what tone is used.

12 Reboot

Shortcut: Menu,

This option lets the user reboot the phone. To select Reboot, press the Menu button and press

, or scroll

down until the selection is highlighted and then press

select

soft key. The LCD displays

Confirm

System Reboot ?

. The display shows two options Reboot or Cancel. Select

Reboot

to reboot the phone.

The option is only displayed for 5 seconds. After 5 seconds, the display returns to the Menu option.

13 Restart

Shortcut: Menu,

This option lets the user restart the phone. To select Restart, press the Menu button and press

, or scroll

down until the selection is highlighted and then press the

select

soft key.

The menu displays

Confirm System Restart?

This display shows the options ok or cancel. Select

restart the phone. This option is only displayed for 5 seconds. After 5 seconds, the display is returned to

the Menu option.

14 Factory Reset

Shortcut: Menu, 14, ok

This option lets the user reset the parameters to the factory settings. To select Factory Reset, press the

Menu button and press 14, or scroll down until the selection is highlighted and press the

select

soft key.

The menu displays

All parameters are reset to factory default values, continue?

The display shows

two options: ok or cancel. Select

to change the settings of the phone to the factory default settings.

This option is only displayed for 5 seconds. After 5 seconds, the display is returned to the Menu option.