Cisco SPA962-NA Administration Guide - Page 90
Network, 9.1 DCHP, 9.2 Current IP Address
View all Cisco SPA962-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
9 Network Chapter 4 LCD Command Reference Guide When the display prompts for the Voice Mail Number, enter the number as if dialing the number. Erase mistaken numbers, one at a time using the delChr soft key. Then press the save button to save the number. After the number is saved, use the mailbox key on the right hand side of the phone (this is the third button up from the Menu button) to dial the mailbox. 9 Network To view or modify network parameters, press the Menu button and then press 9, or scroll down until Network is highlighted and then press the select soft key. This menu displays the IP network configuration settings. The following options are available from the Network menu: • 9.1 DHCP • 9.2 Current IP Address • 9.3 Host Name • 9.4 Domain • 9.5 Current Subnet Mask • 9.6 Current Gateway • 9.7 Enable Web Server • 9.8 Non DHCP IP Address • 9.9 Non DHCP Subnet Mask • 9.10 Non DHCP Default Route • 9.11 Non DHCP DNS 1 • 9.12 Non DHCP DNS 2 • 9.13 Non DHCP NTP Server 1 • 9.14 Non DHCP NTP Server 2 9.1 DCHP Shortcut: Menu, 9, edit, y/n, ok When DHCP is enabled, the phone obtains its IP address from a DHCP server. To view DHCP status, press the Menu button and press 9, or scroll down to the Network option and press the select soft key. The displays shows 1 DHCP Enable with a Yes or No to indicate the current status. To enable or disable DHCP, press the edit soft key and press the y/n soft key to toggle between Yes and No. After making the selection, press the ok button and the display returns to the Network menu. 9.2 Current IP Address Shortcut: Menu, 9, 2 save To view the current IP address, press 2 on the Network menu, or scroll down until Current IP Address is highlighted and press the select soft key. The Current IP Address is set in one of the following ways: Linksys 900 Series IP Phone Administrator Guide 4-8 Document Version 3.0