Compaq Evo Notebook PC n115 Compaq Evo N115 Series Maintenance and Service Gui - Page 104
Disk Cell RTC Battery
View all Compaq Evo Notebook PC n115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Removal and Replacement Procedures When installing the processor, insert a flat-bladed tool in the left "Lock" slot 1 (Figure 5-31). Swing the tool to the right 2 to seat the processor in the socket on the system board. If the processor socket has the letters "CEN" 3 printed on the front, install a stopper 4 into the "Lock" slot. Figure 5-31. Installing the Processor 5.13 Disk Cell RTC Battery Disk Cell RTC Battery Spare Part Number Information Disk cell RTC battery 279769-001 1. Prepare the computer for disassembly (Section 5.3) and remove the following components: a. Optical drive (Section 5.7) b. LED cover (Section 5.8) 5-36 Maintenance and Service Guide
5–36
Maintenance and Service Guide
Removal and Replacement Procedures
When installing the processor, insert a flat-bladed tool in the left
“Lock” slot
1
(Figure 5-31). Swing the tool to the right
2
to seat
the processor in the socket on the system board.
If the processor socket has the letters “CEN”
3
printed on the
front, install a stopper
4
into the “Lock” slot.
Figure 5-31. Installing the Processor
5.13 Disk Cell RTC Battery
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a.
Optical drive (Section 5.7)
b.
LED cover (Section 5.8)
Disk Cell RTC Battery
Spare Part Number Information
Disk cell RTC battery
279769-001