Compaq Evo Notebook PC n115 Compaq Evo N115 Series Maintenance and Service Gui - Page 128
Removing the System Board Fasteners, Optical drive front
View all Compaq Evo Notebook PC n115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Removal and Replacement Procedures 3. Remove the following components (Figure 5-47): a. Four silver TM2.0 × 5.0 screws 1 that secure the optical drive front and rear alignment rails b. Optical drive front 2 and rear 3 alignment rails c. Two silver HM5.0 × 17.5 standoffs 4 d. One silver HM5.0 × 9.0 standoff 5 e. One silver TM2.0 × 5.0 screw 6 with bracket 7 Figure 5-47. Removing the System Board Fasteners 4. Position the computer so the rear panel faces forward. 5-60 Maintenance and Service Guide
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the following components (Figure 5-47):
a.
Four silver TM2.0 × 5.0 screws
1
that secure the optical
drive front and rear alignment rails
b.
Optical drive front
2
and rear
3
alignment rails
c.
Two silver HM5.0 × 17.5 standoffs
4
d.
One silver HM5.0 × 9.0 standoff
5
e.
One silver TM2.0 × 5.0 screw
6
with bracket
7
Figure 5-47. Removing the System Board Fasteners
4. Position the computer so the rear panel faces forward.