Compaq Evo Notebook PC n115 Compaq Evo N115 Series Maintenance and Service Gui - Page 119
Removing the Right Side Panel, on the base enclosure.
View all Compaq Evo Notebook PC n115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Removal and Replacement Procedures 2. Remove the three silver TM2.0 × 5.0 screws 1 that secure the right side panel to the base enclosure (Figure 5-42). 3. Lift the slot 2 on the alignment arm on the bezel off of the circular slot 3 on the base enclosure. 4. Slide the right side panel to the right to remove it from the base enclosure 4. Figure 5-42. Removing the Right Side Panel Reverse the above procedure to install the right side panel. Maintenance and Service Guide 5-51
Removal and Replacement Procedures
Maintenance and Service Guide
5–51
2.
Remove the three silver TM2.0 × 5.0 screws
1
that secure the
right side panel to the base enclosure (Figure 5-42).
3. Lift the slot
2
on the alignment arm on the bezel off of the
circular slot
3
on the base enclosure.
4. Slide the right side panel to the right to remove it from the
base enclosure
4
.
Figure 5-42. Removing the Right Side Panel
Reverse the above procedure to install the right side panel.