Compaq Evo Notebook PC n115 Compaq Evo N115 Series Maintenance and Service Gui - Page 111
Disconnecting the Diskette Drive Cable and, Removing the Diskette Drive Screws
View all Compaq Evo Notebook PC n115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Removal and Replacement Procedures 2. Release the ZIF connector 1 to which the diskette drive cable is connected and disconnect the cable 2 from the system board (Figure 5-36). 3. Remove the silver TM2.0 × 5.0 screw 3 that secures the diskette drive to the base enclosure. Figure 5-36. Disconnecting the Diskette Drive Cable and Removing the Diskette Drive Screws Maintenance and Service Guide 5-43
Removal and Replacement Procedures
Maintenance and Service Guide
5–43
2.
Release the ZIF connector
1
to which the diskette drive cable
is connected and disconnect the cable
2
from the system
board (Figure 5-36).
3. Remove the silver TM2.0 × 5.0 screw
3
that secures the
diskette drive to the base enclosure.
Figure 5-36. Disconnecting the Diskette Drive Cable and
Removing the Diskette Drive Screws