Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 22

IDE CD-ROM Drive, Remove the two T-15 screws and washers from the front of the drive.

Get Compaq ProLiant 800 PDF manuals and user guides View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

2-11 IDE CD-ROM Drive The IDE CD-ROM is removed for replacement or to reconfigure the drives in the removable media area. To remove the IDE CD-ROM drive: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the left side access panel. See "Left Side Access Panel" earlier in this chapter. 3. Remove the two T-15 screws and washers from the front of the drive. 4. Disconnect all cables from the CD-ROM drive. 5. Slide the CD-ROM drive out the front of the chassis. COMPACT Figure 2-8. Removing the IDE CD-ROM drive Reverse steps 1 through 5 to replace the IDE CD-ROM drive. Compaq ProLiant 800 Servers Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
2-11
Compaq ProLiant 800 Servers Maintenance and Service Guide
IDE CD-ROM Drive
The IDE CD-ROM is removed for replacement or to reconfigure the drives in the removable
media area.
To remove the IDE CD-ROM drive:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the left side access panel. See
“
Left Side Access Panel
”
earlier in this chapter.
3.
Remove the two T-15 screws and washers from the front of the drive.
4.
Disconnect all cables from the CD-ROM drive.
5.
Slide the CD-ROM drive out the front of the chassis.
COMPACT
Figure 2-8.
Removing the IDE CD-ROM drive
Reverse steps 1 through 5 to replace the IDE CD-ROM drive.