Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 23
-MB Diskette Drive, Disconnect all cables from the diskette drive.
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2-12 Removal and Replacement Procedures 1.44-MB Diskette Drive The 1.44-MB diskette drive is removed for replacement only. To remove the 1.44-MB diskette drive: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the top cover. See "Top Cover" earlier in this chapter. 3. Disconnect all cables from the diskette drive. 4. Remove the two T-15 screws and washers from the front of the drive. 5. Slide the diskette drive out the front of the chassis. COMPACT Figure 2-9. Removing the 1.44-MB diskette drive Reverse steps 1 through 5 to replace the 1.44-MB diskette drive.
2-12
Removal and Replacement Procedures
1.44-MB Diskette Drive
The 1.44-MB diskette drive is removed for replacement only.
To remove the 1.44-MB diskette drive:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the top cover. See
“
Top Cover
”
earlier in this chapter.
3.
Disconnect all cables from the diskette drive.
4.
Remove the two T-15 screws and washers from the front of the drive.
5.
Slide the diskette drive out the front of the chassis.
COMPACT
Figure 2-9.
Removing the 1.44-MB diskette drive
Reverse steps 1 through 5 to replace the 1.44-MB diskette drive.