Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 64
Tape Drive Test Error Codes, Table 3-12
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3-26 Diagnostic Tools Tape Drive Test Error Codes The 1900 series of Diagnostic error codes identifies failures with tape cartridges, tape drives, tape drive cabling, adapter boards, or the system board assembly. Error Code 1900-xx 1901-xx 1902-xx 1903-xx 1904-xx 1905-xx 1906-xx Table 3-12 Tape Drive Test Error Codes Description Tape ID failed. Tape servo write failed. Tape format failed. Tape drive sensor test failed. Tape BOT/EOT test failed. Tape read test failed. Tape write/read/compare test failed. Recommended Action 1. Replace the tape cartridge and retest. 2. Check and/or replace the signal cable and retest. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if and retest. 5. Replace the tape drive and retest. 6. Replace the system board and retest.