Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 49
Run the System Configuration Utility, Disk Port Address
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3-11 POST Error Messages Continued Error Code Audible Beeps L=Long S=Short 1769-Slot x Drive None Array - Drive(s) disabled due to failure during expand. Select F1 to continue with logical drives disabled. Select F2 to accept data loss and to re- enable logical drives. Probable Source of Problem SMART-2 Controller error. Recommended Action Data has been lost while expanding the array, therefore the drives have been temporarily disabled. Press F2 to accept the data loss and re-enable the logical drives. Restore data from backup. 1771-Primary Disk Port Address Assignment Conflict None Internal and external hard Run the System Configuration Utility drive controllers are both and correct. assigned to the primary address. 1772-Secondary Disk Port Address Assignment Conflict None Address Assignment Conflict. Run the System Configuration Utility Internal and external hard and correct. drive controllers are both assigned to the secondary address. 1773-Primary Fixed Disk Port Assignment Conflict None Fixed disk drive error. Run the System Configuration Utility and correct. 1774-Slot x Drive None SMART-2 Controller error. Data found in Array Accelerator is older Array - Obsolete data than data found on drives. Press F1 to found in Array discard the older data in the Array Accelerator. Select Accelerator and retain the newer data on F1 to discard the drives. contents of Array Accelerator. Select F2 to write contents of Array Accelerator to drives. 1776-Drive Array SCSI Port Termination Error None External and internal SCSI Reconfigure drives. drives are both configured to Port 1. 1777-Drive Array External Drive Subsystem Error None Cooling fan failure, internal Inspect for cooling fan failure or open temperature alert or open side panel. side panel. Continued Compaq ProLiant 800 Servers Maintenance and Service Guide