Compaq ProLiant 800 ProLiant 800 Servers Supporting Pentium II Processors and - Page 68
Compaq Network Interface Boards Test Error Codes, Table 3-15, Compaq Network Interface Boards
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3-30 Diagnostic Tools Compaq Network Interface Boards Test Error Codes The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed NetFlex2/Token Ring Controllers. Error Code 6000-xx 6001-xx 6002-xx 6014-xx 6016-xx 6028-xx 6029-xx 6089-xx 6090-xx 6091-xx 6092-xx Table 3-15 Compaq Network Interface Boards Test Error Codes Description Network card ID failed. Network card setup failed. Network card transmit failed. Network card configuration failed. Network card reset failed. Network card internal failed. Network card external failed. Network card open failed. Network card initialization failed. Recommended Action 1. Check the controller installation in the EISA slot. 2. Check the interrupt type and number setting. 3. Check the media connection at the controller and Multistation Access Unit (MAU). 4. Check the media speed (4/16 ) and type Unshielded Twisted Pair/Shielded Twisted Pair (UTP/STP) settings. 5. Check the MAU, cabling, or other network components. 6. Replace the controller. Network card internal loopback failed. Network card external loopback failed.