Dell 3330dn Mono Laser Printer User's Guide - Page 93
Parallel Buffer, Advanced Status, Protocol, Honor Init, Parallel Mode 2, Mac Binary PS
View all Dell 3330dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Menu item Parallel Buffer Disabled Auto 3K to Advanced Status Off On Protocol Standard Fastbytes Honor Init On Off Parallel Mode 2 On Off Mac Binary PS On Off Auto Description Sets the size of the parallel input buffer Notes: • Auto is the factory default setting. • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed. • The parallel buffer size setting can be changed in 1-K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB and network buffers. • Changing this setting from the printer control panel and then exiting themenus causes the printer to restart. The menu selection is updated. Enables bidirectional communication through the parallel port Notes: • On is the factory default setting. • The Off setting disables parallel port negotiation. Specifies the parallel port protocol Notes: • Fastbytes is the factory default setting. It provides compatibility with most existing parallel ports and is the recommended setting. • The Standard setting tries to resolve parallel port communication problems. Determines whether the printer honors printer hardware initialization requests from the computer Notes: • Off is the factory default setting. • The computer requests initialization by activating the Init signal from the parallel port. Many personal computers activate the Init signal each time the computer is turned on. Determines whether the parallel port data is sampled on the leading or trailing edge of strobe Note: On is the factory default setting. Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. Understanding printer menus 93