Dell Alienware M16 R2 Owners Manual - Page 41
Solid-state drive, Removing the solid-state drive
View all Dell Alienware M16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
NOTE: Repeat the steps to install a second memory into your computer. NOTE: The securing clips return to a locked position. If you do not hear the click, remove the memory module and reinstall it. 5. Replace the Mylar to cover the memory-module slots. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Solid-state drive Removing the solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the solid-state drive in SSD1 slot, SSD2 slot, or both. It also provides a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3) that secures the thermal shield to the system board. 2. Remove the screw (M1.6x4) that secures the thermal shield to the I/O board. 3. Lift the thermal shield off the solid-state drive. 4. Slide and lift the solid-state drive from the solid-state drive slot (SSD1 or SSD2). 41