Dell Alienware M16 R2 Owners Manual - Page 81
Power button, Removing the power button, Steps, Next steps
View all Dell Alienware M16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Steps 1. Align the screw holes on the audio board with the screw holes on the system board. 2. Replace the two screws (M2x2.5) that secure the audio board to the system board. 3. Lift the system board assembly and turn it over. Next steps 1. Follow the procedure from step 5 to step 16 in Installing the system board. 2. Install the Type-C bracket. 3. Install the power-adapter port. 4. Install the fan and heat-sink assembly. 5. Install the wireless card. 6. Install the solid-state drive. 7. Install the battery. 8. Install the rear I/O cover. 9. Install the base cover. 10. Follow the procedure in After working inside your computer. Power button Removing the power button CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear I/O cover. 4. Remove the battery. 5. Remove the power-adapter port. 6. Remove the Type-C bracket. 81