Dell Alienware M16 R2 Owners Manual - Page 54
Speakers, Removing the speakers
View all Dell Alienware M16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Steps 1. Align the screw holes on the fan and heat-sink assembly with the screw holes on the system board. 2. In sequential order (1>2>3>4>5>6), tighten the six captive screws (M2x7.55) that secure the fan and heat-sink assembly to the system board. 3. Replace the six screws (M2x3) that secure the fan and heat-sink assembly to the system board. 4. Connect the left fan cable to the connector (FAN1) on the system board. 5. Adhere the tape that secures the fan cable to the I/O board. 6. Connect the right fan cable to the connector (FAN1) on the I/O board. Next steps 1. Install the rear I/O cover. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers CAUTION: The information in this removal section is intended for authorized service technicians only. 54