Dell Alienware M16 R2 Owners Manual - Page 58
About this task, Steps, Next steps
View all Dell Alienware M16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
About this task The following image(s) indicate the location of the power-adapter port and provides a visual representation of the installation procedure. Steps 1. Place the power-adapter port into the slot on the palm rest and keyboard assembly. 2. Using the alignment post, place the thermal filler into the slot on the palm rest and keyboard assembly. 3. Place the power-adapter port bracket on the power-adapter port. 4. Align the screw holes on the power-adapter port bracket with the screw holes on the palm rest and keyboard assembly. 5. Replace the two screws (M2x3) that secure the power-adapter port bracket to the palm rest and keyboard assembly. 6. Adhere the tapes that secure the power-adapter port to the palm rest and keyboard assembly. 7. Connect the power-adapter port cable to the connector (DCIN1) on the system board. Next steps 1. Install the fan and heat-sink assembly. 2. Install the rear I/O cover. 3. Install the base cover. 4. Follow the procedure in After working inside your computer. 58